首页 > 5-Axis Waterjet Cutting Machine MAX BP-C

ACCURL

5-Axis Waterjet Cutting Machine MAX BP-C Series

ACCURL

MAX BP-C® 3015 WATER JET 50HP

Complete range of Water jet cutting machinery

MAX BP-C® 3015 WATER JET 50HP

Includes Following Features And Configuration

Flexible

Reliable

Profitabie

User Friendly

Standard configuration

  • ITALY ESA® 17″ S660W CNC Control system
  • Human machine interface SMARTTOUCH V6.0
  • YASKAWA ® Highly dynamic EtherCAT servo drive
  • HYPERTHERM ® High Pressure Pump of 50 HP SL-VI – 4200 bar – 1L
  • 1 Table X,Y with cutting head 3000 x 1500 mm working area
  • ACCUSTREAM ® dialine Long lasting cutting nozzle
  • ACCURL® Abrasive backstop system CUT CONTROL 3.0
  • ACCURL® Abrasive regulation-ABRASIVE 3.0
  • Water Jet Soften Treatment–
  • THE MAX 3D 5-Axis Bevel Cutting Head 2.0
  • HYPERTHERM® Echion 50 NEW waterjet pumps
  • Automatic Abrasive feeder with 200L capacity.ABRALINE 1.0
  • ACCURL® Anti-collision system – Collision Protection 2.0
  • Machine safety system. Declaration of conformity and CE marking.
  • Communication system to communicate between the machine and ACCURL®.
  • Industrie 4.0 for sheet metal working with TwinCAT Analytics and TwinCAT IoT

The following Smart Components are Optional:

  • Auto Sludge Removal System
  • IGEMS 3-Axis CAM Minmum 3X Nesting Software
  • IGEMS 5-Axis CAM Normal 3D-5XB Nesting Software
  • ACCURL ® HyPrecision™ Ultra-100S Pump of 100 HP SL-VI • 4200 bar • 1L

Technological Advantages

  • The most versatile cutting systems on the market today, covering the full range of materials and thicknesses, even painted surfaces.
  • Low cutting temperatures to prevent thermal alteration and residual tension.
  • Clean cut without harmful atmospheres
  • The cut surface neither cracks nor bends.
  • Optimal utilization of raw material with negligible material loss
  • Eliminates subsequent finishing processes.
  • Ability to perform different types of cutting simultaneously
  • Very strict tolerances..

Yaskawa Servo Motors & Drives

  • The Smartline is equipped with cutting edge Germany designed
  • YASKAWA servo motors and drives from Japan.
  • High-speed EtherCAT communication
  • Highly dynamic behaviour
  • Brushless three-phase motors
  • Flexible motor type selection

Transmission System

  • ACCURL® Waterjet are provided are equipped with constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
  • X ,Y-Axis with HIWIN linear guide and Ball Screw..
  • Less noise, greater durability and greater precision
  • Unprecedented positioning repeatability of ±0.05 (optional ±0.01).

Anti-collision System • Protection 2.0

  • Electronic collision monitoring system for cutting heads. Upon detection of a determined force on the end of the cutting nozzle, the machine is stopped.
  • The detection sensitivity regulation is programmable and easy to set up electronically.

Abrasive Backstop System. Cut Control 3.0

Abrasive backstop increases the autonomous operation of the machine. In case the nozzle is blocked, the system prevents water reaching the abrasive dosing system..

Abrasive Regulation • Tci Abrasive 3.0

  • The automatic dosing of the amount of abrasive to the cutting process is done by means of a pressurizer located at the foot of the machine completely accessible by the user.
  • This pressurizer pneumatically sends the abrasive to an automatic regulation system, which is assigned a setpoint value from the design software which automatically dosages the amount of abrasive at all times through a real-time channel.
  • This abrasive control system, together with the autonomous feeder, allows the automatic feeding of abrasive, facilitating the continuous and non-stop operation of the machine.

Technical specifications.

Maximum flow600 gr/min
Main voltage24 VDC
Control voltage1.10

    Auto Sullage Removal System 2.0

    This unit will condition the incoming water to the intensifier, removing lime from the water. It is highly recommended to install it to ensure filtration and decalcification of the water used for cutting, prolonging the life of all the high-pressure components.

    Autonomous Abrasive Feeder-abraline 3.0

    This system is responsible for collecting the abrasive and st oring it in its compressed air pressurizing tank, and pushes the sand to the metering hopper located in the cutting head.

    The abrasive transport system consists of:

    • Collecting reservoir including sieve insert
    • Pressure tank
    • Control cabinet

    Net weight80 kg
    Length700 mm
    Width700 mm
    Height1400 mm
    Storage deposit capacity200 l
    Pressurized tank capacity24 l
    Minimum working pressure5 bar
    Maximum working pressure7 bar
    Maximum compressed air consumption500 l/min
    Maximum abrasive flow rate1.300 gr/min

    New Esa S660w Cnc With Command Control

    • The ACCURL Waterjet machine is controlled with a ESA S660 series CNC control unit which provides unprecedented control of the cutting process.
    • Real time graphics: the program is provided with a manual and/ or an automatic zoom to visualize the plate contour.
    • This device willhave installed communication system with the machine, and also WINDOWS7ENTERPRISE as OS ESA S 660W Industrial PC